Watertight Expansion Joints and Construction Sealants by EMSEAL

Migutrans FS 50/35

For floors

Solid all metal expansion joint
hard wearing, maintenance-free, long lasting

Striated surface
ensures good skid resistance

Visible surface has no gaps
avoids dirt accumulation

Articulated telescoping system
absorbs movement in 3 directions

MultiHole mounting bracket
for secure fixing

Migutrans FS 50/35

For floors


  • ADA compliant
  • All-metal profile (aluminum)
  • Load capacity: carts and other small-wheel high point-load traffic such as gurneys, luggage carts, etc.
  • Deck-to-wall E-4 corner version available
  • Fire-rating available through addition of Emshield DFRConsult EMSEAL
  • Good skid resistance given by striated surface
  • Virtually smooth and impact-free traffic surface use at any opening state of the joint
  • Extreme durability
  • No dirt accumulation possible in the movement geometry
  • For assistance in calculating wheel loads of expected fork lifts or other vehicles—Consult EMSEAL


Min| 3/16″ (5mm)
Preferred| 1 3/16″ (30mm)
Max| 1 3/16″ (30mm)

Above are mean joint sizes at mid-point of expected service temperature range


3/8″= +3/16″ and -3/16″
(10mm= +5mm and -5mm)


  • Light duty utility carts
  • Luggage carts
  • Gurneys
  • Vendor carts
  • Any medium point load traffic

Model | Installation Height

FS 50/35 | 1 3/8” (35mm)

Various leg heights are offered through special order. Consult EMSEAL.

Blockout Depth

Blockout depth = Leg Height + 1/4-inch (6mm) for EMSEAL-supplied epoxy-mortar setting-bed

Blockout Width

Blockout width will vary depending on joint-gap size—Consult EMSEAL