Sikaproof A+ 12 Pre-Applied Fully Bonded Below Grade Waterproofing System

Below Grade Expansion Joint Waterproofing Warranty

Emseal® BG + SikaProof® A+ 12

Continuous Waterproofing Through Expansion Joints

Below-grade waterproofing is only as effective as the continuity of the system. Expansion joints introduce movement into reinforced concrete structures and require a solution designed to maintain waterproofing performance while accommodating that movement.

Sika brings the expansion joint and waterproofing membrane together in an integrated, single-source, warranted, below-grade expansion joint waterproofing solution for both pre-applied (blind-side) and post-applied (backfilled) applications.

SikaProof® A+ 12 is an FPO-based sheet membrane for pre- and post-applied, fully bonded below-ground waterproofing of reinforced concrete structures. Its dual-bond technology provides a full and permanent mechanical and adhesive bond with the concrete structure and is designed to prevent lateral water migration between the concrete and membrane.

Combined with the Sika Emseal BG System, the assembly provides a coordinated approach to maintaining continuity of seal in the below-grade waterproofing & expansion joints while accommodating structural movement.

One System. Two Application Conditions.

The SikaProof® A+ 12 and BG System solution addresses below-grade expansion joint waterproofing in both pre-applied and post-applied conditions, providing greater flexibility for different foundation designs and construction sequences.

Pre-Applied | Blind-Side

In pre-applied and underslab applications, SikaProof® A+ 12 is loose laid onto prepared substrates or formwork before reinforcement is installed and concrete is cast. A special hybrid bonding layer forms a permanent bond with the fresh concrete

When integrated with the Sika Emseal BG System, the assembly provides a coordinated approach to expansion joint waterproofing in blind-side construction, where exterior access may be limited or unavailable following concrete placement.

BG Sikaproof A+12 Below Grade Expansion Joint and Waterproofing Membrane Integration in a Pre-Applied Underslab Blind Side Application by Sika Emseal

(Click to Enlarge)

Post-Applied | Backfilled

SikaProof® A+ 12 can also be incorporated as a post-applied system. Sika identifies SikaProof® A+ 12, SikaProof® Adhesive-22, and SikaProof® ExTape-100 as components of the post-applied system.

For accessible foundation walls, the Sika Emseal BG System integrates with the post-applied waterproofing assembly before backfilling, providing a coordinated transition between the expansion joint and the surrounding fully bonded waterproofing system.

BG Sikaproof A+12 Below Grade Expansion Joint and Waterproofing Membrane Integration in a Post-Applied Backfilled Wall Application by Sika Emseal

(Click to Enlarge)

Single-Source Warranty Protection

When the Sika Emseal BG System and SikaProof® A+ 12 are specified and installed as part of an approved Sika assembly, eligible projects can benefit from single-source warranty coverage for the below-grade waterproofing and expansion joint system in both:

  • Pre-applied (blind-side) applications
  • Post-applied (backfilled) applications

By bringing the expansion joint and waterproofing membrane together under Sika, the single-source approach provides greater coordination from design and detailing through installation and warranty support.

One manufacturer.
One coordinated waterproofing solution.
One source for warranty protection.

Below Grade Expansion Joint Waterproofing Warranty

Emseal® BG + SikaProof® A+ 12

Features

  • Single-source Sika warranty solution for below-grade waterproofing and expansion joints
  • Designed for both pre-applied (blind-side) and post-applied (backfilled) applications
  • Provides a coordinated approach to below-grade expansion joint waterproofing
  • Maintains continuity of waterproofing through moving expansion joints with factory-welded BG System transitions.
  • Fully bonded SikaProof® A+ 12 waterproofing system
  • SikaProof® A+ 12 is designed to prevent lateral water migration between the membrane and concrete
  • High flexibility and crack-bridging capabilities
  • Resistant to aggressive conditions in natural groundwater and soil
  • Single source for system components, technical assistance, detailing, and warranty support

Uses

  • Foundation walls
  • Blind-side foundation walls
  • Backfilled walls
  • Basements and other below-grade structures
  • Data centers
  • Healthcare and biotech facilities
  • Airports and transportation facilities
  • Stadiums
  • Commercial and institutional buildings
  • Mixed-use facilities

U.S. Patents

9,850,662
10,851,542

What is the best way to waterproof a below-grade expansion joint?

Below-grade expansion joints require a waterproofing solution that maintains continuity across the joint while accommodating structural movement. The Sika Emseal BG System integrates with SikaProof® A+ 12 to provide a coordinated approach to below-grade expansion joint waterproofing.

Can an expansion joint be waterproofed in a blind-side application?

Yes. The Sika Emseal BG System can be integrated with SikaProof® A+ 12 in a pre-applied (blind-side) waterproofing assembly, allowing the expansion joint to be incorporated into the waterproofing strategy where exterior access will be limited after concrete placement.

Can the BG System be used with post-applied waterproofing?

Yes. The Sika Emseal BG System can also be integrated with SikaProof® A+ 12 for post-applied (backfilled) foundation wall applications.

What is a fully bonded below-grade waterproofing system?

A fully bonded waterproofing system bonds the waterproofing membrane to the concrete structure rather than allowing the membrane to remain independent of the concrete. SikaProof® A+ 12 uses dual-bond technology to provide a full and permanent mechanical and adhesive bond to the concrete and is designed to prevent lateral water migration between the membrane and concrete.

Is a single-source warranty available for the waterproofing membrane and expansion joint?

For eligible projects using an approved assembly, the Sika Emseal BG System and SikaProof® A+ 12 can provide a single-source approach to warranty coverage for the below-grade waterproofing and expansion joint system. Project-specific requirements and warranty eligibility should be confirmed with Sika.

Environmental Product Declaration

Both systems are covered under an Environmental Product Declaration (EPD), providing transparent, third-party-verified environmental impact data to support sustainable building design.

Sika Emseal provides a third-party verified Environmental Product Declaration (EPD) covering its precompressed foam sealants and expansion joint systems including the BG System (ASTM-EPD1130, valid March 2026 – March 2031).

SikaProof A+ 12’s EPD was independently verified in accordance with EN 15804.