www.emseal.com

JOINT SELECTION:
To select a joint for lasting function in your application first calculate anticipated LOAD, MOVEMENT, and JOINT-GAP SIZE, then ask and answer the following questions:

1) Can this model handle the loads from my expected traffic?
2) Can this model handle the expected movement?
3) Will this model straddle my designed joint-gap?

If you answer "NO" to any of the questions move to the next model.  When you can answer "YES" to all three questions you have probably found your joint system.

Need Help or confirmation of your selection?  FILL IN and FAX US THIS CHECKLIST.

DESIGN FOR DURABILITY:
Point loads are the number one killer of interior floor expansion joints and surrounding flooring materials.

"Rubber-and-rail" systems don't last. Cover-plates and lightly-constructed "centering-bar and plate" systems create slip, trip and noise hazards.

EMSEAL is proud to offer a unique line of elegant, well-engineered floor expansion joint systems.

The superior design of the MIGUTRANS series eliminates dangerous, noisy, and unsightly joint deterioration as well as the disruption and expense of replacing failed systems.

The complete line of options caters to a variety of design conditions in both new and retrofit construction. Wheel and axle load ratings ensure suitability for use by everything from coin carts and mobile medical equipment to the heaviest forklifts and other materials handling equipment.

Make MIGUTRANS the Basis of Design for your floors.  Go to the MIGUTRANS HIGH-POINT-LOAD JOINT index at emseal.com.

ADVANTAGES:

-Long lasting, maintenance-free, all-metal, aircraft-aluminum  construction (Alloy 6061-AlMgSi)*

-ADA compliant

-Fire-rating achievable through addition of fire caulk or blanket--Consult EMSEAL

-Ribbed, no-skid surface

-Smooth, no-bump traffic surface at any opening state of the joint

-Grooveless, dirt-free surface

-Three-way movement capability

*Alloy 6061, AlMgSi (aluminum, magnesium, silicon), a cold finished aluminum wrought product, is offered for use in applications requiring excellent corrosion resistance and anodizing response, good workability, excellent joining characteristics, and good acceptance of applied coatings.  Some applications include impact stock for low pressure ammunition and aerospace connectors.

MIGUTRANS FS 40/...
 

Solid, all metal joint. Hard wearing, maintenance-free, long-lasting. For high-point load traffic.   For max. mean* joint sizes up to 35 mm (1 3/8-inches) *at mid-point of expected service temperature range

DIMENSIONS and MOVEMENT CAPABILITY: Joint Size (Up to max. mean joint size) Movement Capability Visible Width Overall Width Deck-To-Wall Options Production Length 35mm (1 3/8") +8mm (3/8") -8 mm (3/8") Total: 16 mm (3/4") 40 mm (1 1/2") 173mm (6 7/8") None (see FS 50 as alternate) 4 m (13.12')

INSTALLATION LEG-HEIGHT OPTIONS: Model #: Installation Height Blockout Depth Blockout Width FS 40/1900 19mm (3/4") Blockout depth = Leg Height + 6mm (1/4-inch) Blockout width will vary depending on joint-gap size--Consult EMSEAL FS 40/3500 35mm (1 3/8") FS 40/6000 60mm (2 3/8")

VEHICLE-LOADING CAPABILITY: Pneumatic tire Load Capacity Solid rubber tire Load Capacity Solid plastic tires Load Capacity 30 MP 7 MP 6.5 kg/mm width of tire - For assistance in calculating wheel loads of expected fork lifts or other vehicles--Consult EMSEAL

Special properties - All-metal profile (aluminum) - ADA compliant - Fire-rating available through addition of fire caulk or blanket--Consult EMSEAL - Striated surface provides good skid resistance - Virtually smooth, impact-free traffic surface at any opening state of the joint - Extreme durability - Three-way movement capability

(Need help with Floor Expansion Joints? Fax Us This Checklist)

Meet online now with EMSEAL:

Expansion joints and precompressed joint sealants by EMSEAL

1-800-526-8365 -- 508-836-0280 --  techinfo@emseal.com -- Fax: 508-836-0281
 

Copyright © 1998-2008 by EMSEAL Corporation. All rights reserved.
This document may not be reproduced in whole or in part without permission.