QuietJoint®

Relleno acústico para juntas y cierre para paredes de separación

Un relleno acústico, QuietJoint es un cierre para particiones y un relleno para juntas y aberturas sin movimiento en interiores. El material bloquea el sonido, viento, calor, frío y polvo. La junta QuietJoint tiene un alto nivel de amortiguación acústica, no lleva anclaje invasivo y fácilmente acopla paredes de separación con ventanas, parteluces o paredes de tabiques.

La junta QuietJoint bloquea la transmisión de sonido entre habitaciones. Está disponible en diferentes colores, es versátil y es ideal para rellenar los vacíos entre los finales de particiones permanentes, semi-permanentes o móviles, y otras condiciones.

QuietJoint se compone de una espuma ignífuga que es revestida con silicona para autopistas. La base de espuma celular es impregnada con acrílico resistente al fuego.

Suministrada en un ancho más grande que la abertura de la junta, QuietJoint se comprime con la mano y se inserta en la abertura. Los bordes del revestimiento de silicona se esconden para hacer un acabado limpio.

QuietJoint®

Relleno acústico para juntas y cierre para paredes de separación

Características

  • Relleno acústico (STC-53, OITC-38, ASTM E-90)
  • Resistente al fuego (Clase A de protección contra la propagación de humo y llamas, ASTM E-84-12)
  • Aislante (Valor R 2.85/pulgada de profundidad, ASTM C-518-04)
  • Sonido atenuante
  • No mecánico
  • No metálico
  • Instalación rápida para construcciones nuevas o reparaciones
  • Sin anclaje invasivo
  • Estéticamente y prácticamente versátil
  • Facilmente gestiona las curvas
  • Ayuda a equilibrar el control de climatización entre las habitaciones

Tamaños

1″ (25mm) a 6″ (150mm)

Colores

Usos

  • Final de partición a ventana (junta SHG revestida en 3 caras)
  • Final de partición a parteluz (junta SHH revestida en 2 caras)
  • Final de partición a pared (junta SHH)
  • Techo de pared (SHH)
  • Bloquear cualquier camino lateral del sonido
  • Llenar huecos y aberturas creadas por la construcción

EE.UU. Patentes

Patente Pendiente

QuietJoint comes coated on either 2 sides (SHH) or 3 sides (SHG).

SHH (two-sided silicone) is ideal for gaps between opaque or solid partitions, walls or mullions.

SHG (three-sided silicone) is typically used to fill gaps between the glass of curtainwall or windows on one side and solid substrates on the other. The third coating aesthetically covers the foam core so that the foam is not visible from the outside through the glass.

QuietJoint is supplied in full-story, 10-foot (3-meter) lengths, and is shipped in loosely laid coils inside a cardboard box.

Over compressing QuietJoint can result in backpressure that could exceed the ability of certain substrates to resist this pressure. User is assumed to have tested all applications to ensure suitability for use.

To preserve a smooth silicone-face appearance, the material should not be compressed into joints that are smaller than the nominal size of the product and the installer should be sure to tuck the edges of the coating at the substrate interface.

With SHG the coating can be the same color on all three faces or different on each face to coordinate with wall coverings. (Note: color transitions between different colored faces may blur).

Not intended for use in moving joints. Not trafficable. For watertight, moving structural joint gaps see EMSEAL Product and Application Index.

  • Disponible para envíos internacionalmente.
  • Precios son disponibles de representantes locales y/o directamente desde el fabricante.
  • El surtido de productos está siendo actualizando continuamente, y por lo tanto EMSEAL® reserva el derecho de modificar o retirar cualquier producto sin previo aviso.